Chapter 45 Introducing Commands
Table 141 Command Summary: Configuration Mode (continued)
COMMAND | DESCRIPTION | PRIVILEGE | ||
|
| exit | Leaves the IGMP configuration | 13 |
|
|
| mode. |
|
|
| Sets the Switch to | 13 | |
|
|
| mode. (If a multicast router with |
|
|
|
| a lower IP address, it will stop |
|
|
|
| sending Query messages on |
|
|
|
| that network.) |
|
|
|
|
|
|
|
| no | Disables | 13 |
|
|
| the Switch, (a multicast router |
|
|
|
| always sends Query messages). |
|
|
|
|
|
|
|
| unknown- | Specifies the action the Switch | 13 |
|
| should perform when it receives |
| |
|
| <dropflooding> | unknown multicast frames. |
|
| ospf |
| Enables and enters the OSPF | 13 |
|
|
| configuration mode. |
|
|
| area | Enables and sets the area ID. | 13 |
|
| area | Enables simple authentication | 13 |
|
| authentication | for the area. |
|
|
| area | Enables MD5 authentication for | 13 |
|
| authentication | the area. |
|
|
|
|
| |
|
| area | Sets the cost to the area. | 13 |
|
|
|
| |
|
|
|
| |
|
| area | Sets a descriptive name for the | 13 |
|
| name <name> | area for identification purposes. |
|
|
| area | Enables and sets the area as a | 13 |
|
| stub | stub area. |
|
|
| area | Sets the stub area not to send | 13 |
|
| stub | any LSA (Link State |
|
|
|
| Advertisement). |
|
|
| area | Sets the virtual link ID | 13 |
|
| information for the area. |
| |
|
|
|
| |
|
| area | Enables simple authentication | 13 |
|
| and sets the authentication key |
| |
|
| for the specified virtual link in the |
| |
|
| authentication- | area. |
|
|
| key <key> |
|
|
|
| area | Sets the virtual link to use the | 13 |
|
| same authentication method as |
| |
|
| the area. |
| |
|
| authentication- |
|
|
|
|
|
| |
|
| area | Enables MD5 authentication and | 13 |
|
| sets the key ID and key for the |
| |
|
| virtual link in the area. |
| |
|
|
|
| |
|
| key <keyid> md5 |
|
|
|
| <key> |
|
|
368 |
| |
| ||
|
|
|