ZyXEL Communications ES-4124 48.2.3 bpdu-control

Chapter 48 Interface Commands

• Perform a remote loopback test from port 7.

sysname# show ethernet oam discovery 7

Port 7
Local client
------------
OAM configurations:	: Active
Mode	: Active
Unidirectional	: Not supported
Remote loopback	: Supported
Link events	: Not supported
Variable retrieval: Not supported
Max. OAMPDU size	: 1518
Operational status:	: Up
Link status	: Up
Info. revision	: 10
Parser state	: Forward
Discovery state	: Send Any

Remote client

-------------

MAC address: 00:a0:c5:dd:e8:f4

Vendor(oui): 0x00 0xa0 0xc5

OAM configurations:	: Active
Mode	: Active
Unidirectional	: Not supported
Remote loopback	: Supported
Link events	: Not supported
Variable retrieval: Not supported
Max. OAMPDU size	: 1518
Operational status:	: 6
Info. revision	: 6
sysname# ethernet oam	remote-loopback test 7

Port 7: Transmitting packets ...

OAM Remote Loopback Test: 1000 transmitted, 1000 received correctly

48.2.3 bpdu-control

Syntax:

bpdu-control <peertunneldiscardnetwork> where

<peertunneldiscard = Type peer to process any BPDUs received on these ports.
network>	Type tunnel to forward BPDUs received on these ports.
	Type tunnel to forward BPDUs received on these ports.
	Type discard to drop any BPDUs received on these ports.
	Type network to process a BPDU with no VLAN tag and
	forward a tagged BPDU.