ZyXEL Communications ES-4124 45.12.3 General Configuration Mode

Chapter 45 Introducing Commands

Table 140 Command Summary: Enable Mode (continued)

COMMAND			DESCRIPTION	PRIVILEGE
		[command </>]	Connects to an SSH server with	0
			the specified SSH version and
			addition commands to be
			executed on the server.
test	interface port-		Performs an internal loopback	13
	channel <port-		test on the specified ports.
	list>
traceroute	<iphost-name>		Determines the path a packet	0
	[in-bandout-of-		takes to a device.
	bandvlan <vlan-
	id>][ttl <1-255>]
	[wait <1-60>]
	[queries <1-10>]
	help		Displays help information for this	0
			command.
write	memory		Saves current configuration to the	13
			configuration file the Switch is
			currently using.
		<index>	Saves current configuration to the	13
			specified configuration file on the
			Switch.

45.12.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 141 Command Summary: Configuration Mode

COMMAND			DESCRIPTION	PRIVILEGE
aaa	accounting	commands	Enables accounting of	13
		<privilege>	command sessions and
		stop-only	specifies the minimum privilege
		tacacs+	level for which command
			sessions should be recorded.
		commands	Enables sending accounting	13
		<privilege>	information for command
		stop-only	sessions to all configured
		tacacs+	accounting servers at the same
			time.
		[broadcast]
		dot1x <start-	Enables accounting of IEEE	13
		stopstop-only>	802.1x authentication sessions
		<radiustacacs+	and specifies the mode and
		>	protocol method.
		dot1x <start-	Enables sending accounting	13
		stopstop-only>	information for IEEE 802.1x
		<radiustacacs+	authentication sessions to all
		> [broadcast]	configured accounting servers at
			the same time.
		exec <start-	Enables accounting of	13
		stopstop-only>	administrative sessions via
		<radiustacacs+	SSH, Telnet and console port
		>	and specifies the mode and
			protocol method.

	349
ES-4124 User’s Guide