ZyXEL Communications ES-4124 47.8 Enabling Trunking

		Chapter 47 Configuration Mode Commands
where
name <name>	=	Names the filtering rule.
mac <mac-addr>	=	Specifies the MAC address you want to filter.
vlan <vlan-id>	=	Specifies which VLAN this rule applies to.
drop <src/dst/both>	=	Selects the behavior of the rule.
		• src - drop packets coming from the specified MAC
		address
		• dst- drop packets going to the specified MAC
		address
		• both - drop packets coming from or going to the
		specified MAC address

An example is shown next.

•Create a filtering rule called “filter1”.

•Drop packets coming from and going to MAC address 00:12:00:12:00:12 on VLAN.

sysname(config)# mac-filter name filter 1

sysname(config)# mac-filter name filter 1 mac 00:12:00:12:00:12 vlan 1 drop both

47.8 Enabling Trunking

To create and enable a trunk, enter trunk followed by the ports which you want to group and press [ENTER].

Syntax:

trunk <T1T2T3T4T5T6>

trunk <T1T2T3T4T5T6> interface <port-list> trunk <T1T2T3T4T5T6> lacp

where

<T1T2T3T4T5T6>	=	Enables the trunk.
<T1T2T3T4T5T6>	=	Places ports in the trunk.
interface <port-list>
<T1T2T3T4T5T6> lacp	=	Enables LACP in the trunk.

An example is shown next.

•Create trunk 1 on the Switch.

•Place ports 5-8 in trunk 1.

	399
ES-4124 User’s Guide