Chapter 21 VLAN Stacking
Table 52 | 802.1Q Frame |
|
|
(SP)TPID | (Service Provider) Tag Protocol IDentifier | Data | Frame data |
|
|
|
|
VID | VLAN ID | FCS | Frame Check Sequence |
|
|
|
|
21.4 Configuring VLAN Stacking
Click Advanced Applications > VLAN Stacking to display the screen as shown.
Figure 80 Advanced Application > VLAN Stacking
The following table describes the labels in this screen.
Table 53 Advanced Application > VLAN Stacking
LABEL | DESCRIPTION |
Active | Select this checkbox to enable VLAN stacking on the Switch. |
|
|
SP TPID | SP TPID is a standard Ethernet type code identifying the frame and indicates whether the |
| frame carries IEEE 802.1Q tag information. Choose 0x8100 or 0x9100 from the |
| list box or select Others and then enter a |
| 0xFFFF. 0x denotes a hexadecimal number. It does not have to be typed in the Others text |
| field. |
|
|
Port | The port number identifies the port you are configuring. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. Use this row first |
| to set the common settings and then make adjustments on a |
| Note: Changes in this row are copied to all the ports as soon as you make |
| them. |
|
|
172 |
| |
| ||
|
|
|