Chapter 38 Syslog
Figure 190 Management > Syslog > Server Setup
The following table describes the labels in this screen.
Table 128 Management > Syslog > Server Setup
LABEL | DESCRIPTION |
Active | Select this check box to have the device send logs to this syslog server. Clear the |
| check box if you want to create a syslog server entry but not have the device send |
| logs to it (you can edit the entry later). |
|
|
Server Address | Enter the IP address of the syslog server. |
|
|
Log Level | Select the severity level(s) of the logs that you want the device to send to this |
| syslog server. The lower the number, the more critical the logs are. |
|
|
Add | Click Add to save your changes to the Switch’s |
| loses these changes if it is turned off or loses power, so use the Save link on the |
| top navigation panel to save your changes to the |
| are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Clear | Click Clear to return the fields to the factory defaults. |
|
|
Index | This is the index number of a syslog server entry. Click this number to edit the |
| entry. |
|
|
Active | This field displays Yes if the device is to send logs to the syslog server. No |
| displays if the device is not to send logs to the syslog server. |
|
|
IP Address | This field displays the IP address of the syslog server. |
|
|
Log Level | This field displays the severity level of the logs that the device is to send to this |
| syslog server. |
|
|
Delete | Select an entry’s Delete check box and click Delete to remove the entry. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
| 311 |
|
|