Chapter 4 The Web Configurator
The following table describes the links in the navigation panel.
Table 5 Navigation Panel Links
LINK | DESCRIPTION |
Basic Settings |
|
|
|
System Info | This link takes you to a screen that displays general system and hardware |
| monitoring information. |
|
|
General Setup | This link takes you to a screen where you can configure general identification |
| information about the Switch. |
|
|
Switch Setup | This link takes you to a screen where you can set up global Switch parameters |
| such as VLAN type, MAC address learning, IGMP snooping, GARP and priority |
| queues. |
|
|
IP Setup | This link takes you to a screen where you can configure the IP address, subnet |
| mask (necessary for Switch management) and DNS (domain name server) and set |
| up to 64 IP routing domains. |
|
|
Port Setup | This link takes you to screens where you can configure settings for individual |
| Switch ports. |
|
|
Advanced Application | |
|
|
VLAN | This link takes you to screens where you can configure |
| VLAN (depending on what you configured in the Switch Setup menu). You can also |
| configure a protocol based VLAN or a subnet based VLAN in these screens. |
|
|
Static MAC | This link takes you to screens where you can configure static MAC addresses for a |
Forwarding | port. These static MAC addresses do not age out. |
|
|
Filtering | This link takes you to a screen to set up filtering rules. |
|
|
Spanning Tree | This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to |
Protocol | prevent network loops. |
|
|
Bandwidth | This link takes you to screens where you can cap the maximum bandwidth allowed |
Control | from specified source(s) to specified destination(s). |
|
|
Broadcast Storm | This link takes you to a screen to set up broadcast filters. |
Control |
|
|
|
Mirroring | This link takes you to screens where you can copy traffic from one port or ports to |
| another port in order that you can examine the traffic from the first port without |
| interference |
|
|
Link Aggregation | This link takes you to a screen where you can logically aggregate physical links to |
| form one logical, |
|
|
Port | This link takes you to a screen where you can configure IEEE 802.1x port |
Authentication | authentication as well as MAC authentication for clients communicating via the |
| Switch. |
|
|
Port Security | This link takes you to a screen where you can activate MAC address learning and |
| set the maximum number of MAC addresses to learn on a port. |
|
|
Classifier | This link takes you to a screen where you can configure the Switch to group |
| packets based on the specified criteria. |
|
|
Policy Rule | This link takes you to a screen where you can configure the Switch to perform |
| special treatment on the grouped packets. |
|
|
Queuing Method | This link takes you to a screen where you can configure queuing with associated |
| queue weights for each port. |
|
|
VLAN Stacking | This link takes you to a screen where you can configure VLAN stacking. |
|
|
Multicast | This link takes you to a screen where you can configure various multicast features |
| and create multicast VLANs. |
|
|
| 57 |
|
|