Chapter 45 Introducing Commands
Table 140 Command Summary: Enable Mode (continued)
COMMAND | DESCRIPTION | PRIVILEGE | ||
|
| Displays the protocol based | 3 | |
|
| vlan | VLAN settings for the specified |
|
|
|
| port(s). |
|
| ip |
| Displays IP related information. | 0 |
|
| arp | Displays the ARP table. | 3 |
|
| dvmrp group | Displays DVMRP group | 3 |
|
|
| information. |
|
|
| dvmrp interface | Displays DVMRP interface | 3 |
|
|
| information. |
|
|
| dvmrp neighbor | Displays DVMRP neighbor | 3 |
|
|
| information. |
|
|
| dvmrp prune | Displays the DVMRP prune | 3 |
|
|
| information. |
|
|
| dvmrp route | Displays the DVMRP routes. | 3 |
|
| igmp group | Displays multicast group details | 3 |
|
|
| for each port(s). |
|
|
| igmp interface | Displays IGMP settings for each | 3 |
|
|
| IP interface. |
|
|
| igmp multicast | Displays details about known and | 3 |
|
|
| unknown multicast frames |
|
|
|
| passing through the Switch on |
|
|
|
| the specified port(s). |
|
|
|
|
|
|
|
| igmp timer | Displays IGMP counter and timer | 3 |
|
|
| settings for each IP interface. |
|
|
| iptable all | Displays the IP address table. | 3 |
|
| [IPVIDPORT] | You can sort the table based on |
|
|
|
| the IP address, VLAN ID or the |
|
|
|
| port number. |
|
|
|
|
|
|
|
| iptable count | Displays the number of IP | 3 |
|
|
| interfaces configured on the |
|
|
|
| Switch. |
|
|
|
|
|
|
|
| iptable static | Displays the static IP address | 3 |
|
|
| table. |
|
|
| ospf database | Displays OSPF link state | 3 |
|
|
| database information. |
|
|
| ospf interface | Displays OSPF interface settings. | 3 |
|
| ospf neighbor | Displays OSPF neighbor | 3 |
|
|
| information. |
|
|
| Displays protocol based VLAN | 3 | |
|
| vlan | settings on the port(s). |
|
|
| route | Displays IP routing information. | 3 |
|
| route static | Displays IP static route | 3 |
|
|
| information. |
|
|
| source binding | Displays the static bindings (IP to | 3 |
|
|
| MAC address) configured on the |
|
|
|
| Switch. |
|
|
|
|
|
|
| 345 |
|
|