Chapter 34 VRRP
If switch A (the master router) is unavailable, switch B takes over. Traffic is then processed by switch B.
34.2 VRRP Status
Click IP Application > VRRP in the navigation panel to display the VRRP Status screen as shown next.
Figure 154 IP Application > VRRP Status
The following table describes the labels in this screen.
Table 106 IP Application > VRRP Status
LABEL | DESCRIPTION |
Index | This field displays the index number of a rule. |
|
|
Network | This field displays the IP address and the subnet mask bits of an IP routing domain |
| that is associated to a virtual router. |
|
|
VRID | This field displays the ID number of the virtual router. |
|
|
VR Status | This field displays the status of the virtual router. |
| This field is Master indicating that this Switch functions as the master router. |
| This field is Backup indicating that this Switch functions as a backup router. |
| This field displays Init when this Switch is initiating the VRRP protocol or when the |
| Uplink Status field displays Dead. |
Uplink Status | This field displays the status of the link between this Switch and the uplink gateway. |
| This field is Alive indicating that the link between this Switch and the uplink gateway |
| is up. Otherwise, this field is Dead. |
| This field displays Probe when this Switch is check for the link state. |
|
|
Poll Interval(s) | The text box displays how often (in seconds) this screen refreshes. You may change |
| the refresh interval by typing a new number in the text box and then clicking Set |
| Interval. |
|
|
Stop | Click Stop to halt system statistic polling. |
|
|
272 |
| |
| ||
|
|
|