Chapter 4 The Web Configurator
Table 5 Navigation Panel Links (continued)
LINK | DESCRIPTION |
Auth and Acct | This link takes you to a screen where you can configure authentication and |
| accounting services via external servers. The external servers can be either |
| RADIUS (Remote Authentication |
| Access Controller |
|
|
IP Source Guard | This link takes you to a screen where you can configure filtering of unauthorized |
| DHCP and ARP packets in your network. |
|
|
Loop Guard | This link takes you to a screen where you can configure protection against network |
| loops that occur on the edge of your network. |
|
|
IP Application |
|
|
|
Static Route | This link takes you to screens where you can configure static routes. A static route |
| defines how the Switch should forward traffic by configuring the TCP/IP parameters |
| manually. |
|
|
RIP | This link takes you to a screen where you can configure the RIP (Routing |
| Information Protocol) direction and versions. |
|
|
OSPF | This link takes you to screens where you can view the OSPF status and configure |
| OSPF settings. |
|
|
IGMP | This link takes you to a screen where you can configure the IGMP settings. |
|
|
DVMRP | This link takes you to a screen where you can configure the DVMRP (Distance |
| Vector Multicast Routing Protocol) settings. |
|
|
IP Multicast | This link takes you to a screen where you can configure the Switch to remove |
| VLAN tags from IP multicast packets on an |
|
|
DiffServ | This link takes you to screens where you can enable DiffServ, configure marking |
| rules and set |
|
|
DHCP | This link takes you to a screen where you can configure the DHCP settings. |
|
|
VRRP | This link takes you to screens where you can configure redundant virtual router for |
| your network. |
|
|
Management |
|
|
|
Maintenance | This link takes you to screens where you can perform firmware and configuration |
| file maintenance as well as reboot the system. |
|
|
Access Control | This link takes you to screens where you can change the system login password |
| and configure SNMP and remote management. |
|
|
Diagnostic | This link takes you to screens where you can view system logs and test port(s). |
|
|
Syslog | This link takes you to screens where you can setup system logs and a system log |
| server. |
|
|
Cluster | This link takes you to a screen where you can configure clustering management |
Management | and view its status. |
|
|
MAC Table | This link takes you to a screen where you can view the MAC addresses (and types) |
| of devices attached to what ports and VLAN IDs. |
|
|
IP Table | This link takes you to a screen where you can view the IP addresses (and types) of |
| devices attached to what ports and VLAN IDs. |
|
|
ARP Table | This link takes you to a screen where you can view the MAC addresses – IP |
| address resolution table. |
|
|
Routing Table | This link takes you to a screen where you can view the routing table. |
|
|
Configure Clone | This link takes you to a screen where you can copy attributes of one port to other |
| ports. |
|
|
58 |
| |
| ||
|
|
|