Chapter 48 Interface Commands

•Select ports 3-6 for internal loopback test.

•Execute the test command.

•View the results.

sysname(config)# interface port-channel 3-6 sysname(config-interface)# test 3-6 Testing internal loopback on port 3 :Passed!

Ethernet Port 3 Test ok.

Testing internal loopback on port 4 :Passed! Ethernet Port 4 Test ok.

Testing internal loopback on port 5 :Passed! Ethernet Port 5 Test ok.

Testing internal loopback on port 6 :Passed! Ethernet Port 6 Test ok.

48.3 Interface no Command Examples

Similar to the no commands in the Enable and Config modes, the no commands for the Interface sub mode also disable certain features. In this mode, however, this takes place on a port by port basis.

48.3.1 no bandwidth-limit

You can disable bandwidth limit on port 1 simply by placing the no command in front of the bandwidth-limit command.

Syntax:

no bandwidth-limit

An example is shown next:

• Disable bandwidth limit on port1

sysname(config)# interface port-channel 1 sysname(config-interface)# no bandwidth-limit cir

 

411

ES-4124 User’s Guide