Chapter 45 Introducing Commands
Table 143 interface
COMMAND |
|
| DESCRIPTION | PRIVILEG |
|
| E | ||
|
|
|
| |
| no | ip dvmrp | Disables DVMRP in this routing | 13 |
|
|
| domain. |
|
|
| ip igmp | Disables IP IGMP in this routing | 13 |
|
|
| domain. |
|
|
| ip ospf | Disables OSPF authentication | 13 |
|
| key settings in this routing |
| |
|
|
| domain. |
|
|
| ip ospf | Sets the routing domain not to | 13 |
|
| use the same OSPF |
| |
|
|
| authentication settings as the |
|
|
|
| area. |
|
|
|
|
|
|
|
| ip ospf cost | Disables the OSPF cost in the | 13 |
|
|
| routing domain. |
|
|
| ip ospf message- | Sets the routing domain not to | 13 |
|
| use a security key in OSPF. |
| |
|
| ip ospf priority | Resets the OSPF priority for the | 13 |
|
|
| interface. |
|
|
| ip vrrp | Resets the VRRP authentication | 13 |
|
| settings. |
|
The following table lists the vlan commands in configuration mode.
Table 144 Command Summary:
COMMAND |
| DESCRIPTION | PRIVILEG | |
| E | |||
|
|
|
| |
vlan <1- |
|
| Creates a new VLAN group. | 13 |
4094> |
|
|
|
|
| exit |
| Leaves the VLAN configuration | 13 |
|
|
| mode. |
|
| fixed |
| Specifies the port(s) to be a | 13 |
|
|
| permanent member of this VLAN |
|
|
|
| group. |
|
|
|
|
|
|
| forbidden <port- |
| Specifies the port(s) you want to | 13 |
| list> |
| prohibit from joining this VLAN |
|
|
|
| group. |
|
| help |
| Displays a list of available VLAN | 13 |
|
|
| commands. |
|
| inactive |
| Disables the specified VLAN. | 13 |
| ip address | Sets the IP address of the | 13 | |
|
|
| Switch in the VLAN. |
|
|
| Sets the IP address of the | 13 | |
|
| manageable | Switch in the VLAN and allow |
|
|
|
| remote management to this IP |
|
|
|
| address. |
|
|
|
|
|
|
|
| default gateway <ip- | Sets the default gateway IP | 13 |
|
| address> | address in this VLAN. |
|
382 |
| |
| ||
|
|
|