|
| Chapter 7 Wireless | |
| Table 13 Wireless > General: More Secure: WPA(2) | ||
| LABEL | DESCRIPTION |
|
| Encryption | Select the encryption type (AES or TKIP+AES) for data encryption. |
|
|
| Select AES if your wireless clients can all use AES. |
|
|
| Select TKIP+AES to allow the wireless clients to use either TKIP or |
|
|
| AES. |
|
|
|
|
|
| WPA2 Pre- | This field is available only when you select WPA2. |
|
| Authentication |
| |
|
|
| |
|
| (already connecting to an AP) to perform IEEE 802.1x authentication |
|
|
| with another AP before connecting to it. Select Enabled to turn on |
|
|
| preauthentication in WAP2. Otherwise, select Disabled. |
|
|
|
|
|
| Network | Specify how often wireless stations have to resend usernames and |
|
| Interval | passwords in order to stay connected. |
|
|
| If wireless station authentication is done using a RADIUS server, |
|
|
| the reauthentication timer on the RADIUS server has priority. |
|
| Group Key | The Group Key Update Timer is the rate at which the RADIUS server |
|
| Update Timer | sends a new group key out to all clients. |
|
|
|
|
|
7.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the ZyXEL Device.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 28 Network Settings > Wireless > More AP
The following table describes the labels in this screen.
Table 14 Network Settings > Wireless > More AP
LABEL DESCRIPTION
#This is the index number of the entry.
Status | This field indicates whether this SSID is active. A yellow bulb signifies |
| that this SSID is active. A gray bulb signifies that this SSID is not active. |
| 101 |
|
|