Chapter 6 Broadband
6.2 The Broadband Screen
Use this screen to change your ZyXEL Device’s Internet access settings. Click Network Settings> Broadband from the menu. The summary table shows you the configured WAN services (connections) on the ZyXEL Device.
Figure 19 Network Settings > Broadband
The following table describes the labels in this screen.
Table 6 Network Settings > Broadband
LABEL | DESCRIPTION |
Add new WAN | Click this button to create a new connection. |
interface |
|
|
|
# | This is the index number of the entry. |
|
|
Status | This is the status of the connection. |
|
|
Name | This is the service name of the connection. |
|
|
Type | This shows whether it is a VDSL, ADSL, or Ethernet connection. |
|
|
Encapsulation | This is the method of encapsulation used by this connection. |
|
|
VLAN | This is the Virtual LAN (VLAN) number configured for this WAN |
| connection. |
|
|
VPI/VCI | This is the Virtual Path Identifier (VPI) and Virtual Channel Identifier |
| (VCI) numbers configured for this WAN connection. |
|
|
ATM QoS | This is the type of ATM QoS of the connection. |
|
|
IGMP Proxy | This shows whether the ZyXEL Device act as an IGMP proxy on this |
| connection. |
|
|
NAT | This shows whether NAT is activated or not for this connection. |
|
|
Default Gateway | This shows whether the ZyXEL Device use the WAN interface of this |
| connection as the system default gateway. |
|
|
Modify | Click the Edit icon to configure the WAN connection. |
| Click the Delete icon to remove the WAN connection. |
|
|
| 77 |
|
|