Chapter 14 IGMP
14.3.3 IGMP Host Limitation Add
Use this screen to control a LAN host’s access to an IGMP multicast service domain. Click Network Settings > IGMP Setting > IGMP Filter > Add a new host limitation to open the following screen.
Figure 85 Network Settings > IGMP Setting > IGMP Filter > Add a new host limitation
The following table describes the fields in this screen.
Table 60 Network Settings > IGMP Setting > IGMP Filter > Add a new host limitation
LABEL | DESCRIPTION |
Service | Specify the name of the IGMP multicast service domain to which you |
| want to block or allow access. |
|
|
LAN Host | Select the IP address of one of the ZyXEL Device’s LAN hosts. |
|
|
IGMP Enabled | Select whether or not the LAN device using the specified IP address is |
| allowed to use the IGMP multicast service domain. |
|
|
Max Allowed | This shows to how many of the IGMP multicast service domain’s |
Channels | channels the LAN device using the specified IP address can subscribe. |
|
|
IGMP Enabled | Select whether or not the LAN device is allowed to access IGMP |
| services through the ZyXEL Device. |
|
|
Max Allowed | Specify to how many IGMP channels the LAN device is allowed to |
Channels | subscribe. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to exit this screen without saving. |
|
|
208 |
| |
| ||
|
|
|