Appendix A Setting up Your Computer’s IP Address
•From the Configure box, select Manually.
•Type your IP address in the IP Address box.
•Type your subnet mask in the Subnet mask box.
•Type the IP address of your ZyXEL Device in the Router address box.
5Click Apply Now and close the window.
6Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux 9.0. Procedure, screens and file location may vary depending on your Linux distribution and release version.
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1Click the Red Hat button (located on the bottom left corner), select System Setting and click Network.
Figure 173 Red Hat 9.0: KDE: Network Configuration: Devices
| 339 |
|
|