Chapter 15 Interface Group
In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT 5.0 (meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses the WAN VDSL_PoE/ppp0.1 interface.
Figure 88 Interface Grouping Application
Default: ETH 2~4
192.168.1.x/24
eth10.0
Internet
VDSL_PoE/ppp0.1 192.168.2.x/24
DHCP Vendor ID option: MSFT 5.0
Click Network Settings > Interface Group to open the following screen.
Figure 89 Network Settings > Interface Group
The following table describes the fields in this screen.
Table 63 Network Settings > Interface Group
LABEL | DESCRIPTION |
Add New | Click this button to create a new interface group. |
Interface Group |
|
|
|
Group Name | This shows the descriptive name of the group. |
|
|
WAN Interface | This shows the WAN interfaces in the group. |
|
|
LAN Interfaces | This shows the LAN interfaces in the group. |
|
|
DHCP Vendor IDs | The ZyXEL Device automatically adds LAN hosts sending traffic with |
| any of the Vendor Class Identifiers listed here to the interface group. |
| This field is blank if you do not have the ZyXEL Device automatically |
| add clients to the interface group based on their Vendor Class |
| Identifiers. |
|
|
Modify | Click the Delete icon to remove the group. |
|
|
Add | Click this button to create a new group. |
|
|
212 |
| |
| ||
|
|
|