Chapter 8 Home Networking
The following table describes the fields in this screen.
Table 24 Network Settings > Home Networking > LAN Setup
LABEL |
| DESCRIPTION |
Group Name |
| Select the interface group name for which you want to configure LAN |
|
| settings. See Chapter 15 on page 211 for how to create a new |
|
| interface group. |
|
|
|
LAN IP Setup |
| |
|
| |
IP Address |
| Enter the LAN IP address you want to assign to your ZyXEL Device in |
|
| dotted decimal notation, for example, 192.168.1.1 (factory default). |
|
|
|
Subnet Mask |
| Type the subnet mask of your network in dotted decimal notation, for |
|
| example 255.255.255.0 (factory default). Your ZyXEL Device |
|
| automatically computes the subnet mask based on the IP Address you |
|
| enter, so do not change this field unless you are instructed to do so. |
|
|
|
DHCP Server State |
| |
|
| |
DHCP |
| Select Enable to have the ZyXEL Device act as a DHCP server or DHCP |
|
| relay agent. |
|
| Select Disable to stop the DHCP server on the ZyXEL Device. |
|
| Select DHCP Relay to have the ZyXEL Device forward DHCP request |
|
| to the DHCP server. |
|
|
|
DHCP Relay |
| This field is only available when you select DHCP Relay in the DHCP |
Server Address |
| field. |
|
|
|
IP Address |
| Enter the IP address of the actual remote DHCP server in this field. |
|
|
|
IP Addressing |
| This field is only available when you select Enable in the DHCP field. |
Values |
|
|
|
|
|
Beginning IP |
| This field specifies the first of the contiguous addresses in the IP |
Address |
| address pool. |
|
|
|
Ending IP |
| This field specifies the last of the contiguous addresses in the IP |
Address |
| address pool. |
|
|
|
DHCP Server |
| This is the period of time |
Lease Time |
| automatically assigns IP addresses to clients when they log in. DHCP |
|
| centralizes IP address management on central computers that run the |
|
| DHCP server program. DHCP leases addresses, for a period of time, |
|
| which means that past addresses are “recycled” and made available |
|
| for future reassignment to other systems. |
|
| This field is only available when you select Enable in the DHCP field. |
|
|
|
Days/Hours/ |
| Enter the lease time of the DHCP server. |
Minutes |
|
|
|
|
|
DNS Values |
| This field is only available when you select Enable in the DHCP field. |
|
|
|
DNS |
| Select the type of service that you are registered for from your |
|
| Dynamic DNS service provider. |
|
| Select Dynamic if you have the Dynamic DNS service. |
|
| Select Static if you have the Static DNS service. |
|
|
|
DNS Server 1 |
| Enter the first and second DNS (Domain Name System) server IP |
DNS Server 2 |
| address the ZyXEL Device passes to the DHCP clients. |
|
| |
|
|
|
| 131 |
|
|