Chapter 22 Service Control
Click Security Settings > Service Control to open the following screen.
Figure 124 Security Settings > Service Control
The following table describes the fields in this screen.
Table 94 Security Settings > Service Control
LABEL | DESCRIPTION |
General |
|
|
|
# | This is the index number of the entry. |
|
|
Services Name | This is the service you may use to access the ZyXEL Device. |
|
|
LAN | Select the Enable check box for the corresponding services that you |
| want to allow access to the ZyXEL Device from the LAN. |
|
|
WAN | Select the Enable check box for the corresponding services that you |
| want to allow access to the ZyXEL Device from the WAN. |
|
|
Port | You may change the server port number for a service if needed, |
| however you must use the same port number in order to use that |
| service for remote management. |
|
|
Certificate |
|
|
|
HTTPS Certificate | Select a certificate the HTTPS server (the ZyXEL Device) uses to |
| authenticate itself to the HTTPS client. You must have certificates |
| already configured in the Certificates screen. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to restore your previously saved settings. |
|
|
266 |
| |
| ||
|
|
|