Chapter 4 Tutorials
You need to specify a static routing rule on the ZyXEL Device to specify R as the router in charge of forwarding traffic to N2. In this case, the ZyXEL Device routes traffic from A to R and then R routes the traffic to B.
N1
A
R
N2
B
This tutorial uses the following example IP settings:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER | IP ADDRESS |
The ZyXEL Device’s WAN | 172.16.1.1 |
|
|
The ZyXEL Device’s LAN | 192.168.1.1 |
|
|
A | 192.168.1.34 |
|
|
R’s N1 | 192.168.1.253 |
|
|
R’s N2 | 192.168.10.2 |
|
|
B | 192.168.10.33 |
|
|
To configure a static route to route traffic from N1 to N2:
1Log into the ZyXEL Device’s Web Configurator in advanced mode.
2Click Advanced > Routing.
3Click Add New Static Route Entry in the Static Route screen.
4Configure the Static Route Setup screen using the following settings:
| 59 |
|
|