Chapter 4 Tutorials
2In this example, the DSL connection has the following information.
General
Connection Name | MyDSLConnection |
|
|
Type | ADSL |
|
|
Connection Mode | Routing |
|
|
Encapsulation | PPPoE |
|
|
ATM PVC Configuration |
|
|
|
VPI/VCI | 36/48 |
|
|
Encapsulation Mode | |
|
|
Service Category | UBR without PCR |
|
|
Account Information |
|
|
|
PPP User Name | |
|
|
PPP Password | ABCDEF! |
|
|
PPPoE Service Name | My DSL |
|
|
Static IP Address | 192.168.1.32 |
|
|
Others | PPPoE Passthrough: Disabled |
| NAT: Enabled |
| IGMP Multicast Proxy: Enabled |
| Apply as Default Gateway: Enabled |
|
|
3Select the Active check box. Enter the General and ATM PVC Configuration settings as provided above.
Set the Type to ADSL.
Choose the Encapsulation specified by your DSL service provider. For this example, the service provider requires a username and password to establish Internet connection. Therefore, select PPPoE as the WAN encapsulation type.
4Enter the account information provided to you by your DSL service provider.
5Configure this rule as your default Internet connection by selecting the Apply as Default Gateway check box. Then select DNS as Static and enter the DNS server addresses provided to you, such as 192.168.5.2 (DNS server1)/192.168.5.1 (DNS server2).
44 |
| |
| ||
|
|
|