16

Firewall

16.1 Overview

This chapter shows you how to enable and configure the ZyXEL Device firewall. Use the firewall to protect your ZyXEL Device and network from attacks by hackers on the Internet and control access to it. By default the firewall:

allows traffic that originates from your LAN computers to go to all other networks.

blocks traffic that originates on other networks from going to the LAN.

The following figure illustrates the default firewall action. User A can initiate an IM (Instant Messaging) session from the LAN to the WAN (1). Return traffic for this session is also allowed (2). However other traffic initiated from the WAN is blocked (3 and 4).

Figure 91 Default Firewall Action

LANWAN

1

A2

3

4

16.1.1What You Can Do in this Chapter

Use the Firewall screen to configure the security level of the firewall on the ZyXEL Device (Section 16.2 on page 217).

Use the Protocol screen to add or remove predefined Internet services and configure firewall rules (Section 16.3 on page 217).

Use the Access Control screen to view and configure incoming/outgoing filtering rules (Section 16.4 on page 220).

 

215

VSG1432-B101 Series User’s Guide