Chapter 7 Wireless
Table 17 Network Settings > Wireless > WPS
LABEL | DESCRIPTION |
Connect | Click this button to add another |
| wireless range of the ZyXEL Device) to your wireless network. This |
| button may either be a physical button on the outside of device, or a |
| menu button similar to the Connect button on this screen. |
| Note: You must press the other wireless device’s WPS button |
| within two minutes of pressing this button. |
|
|
Method 2 | Use this section to set up a WPS wireless network by entering the PIN |
| of the client into the ZyXEL Device. |
|
|
Register | Enter the PIN of the device that you are setting up a WPS connection |
| with and click Register to authenticate and add the wireless device to |
| your wireless network. |
| You can find the PIN either on the outside of the device, or by checking |
| the device’s settings. |
| Note: You must also activate WPS on that device within two |
| minutes to have it present its PIN to the ZyXEL Device. |
|
|
Method 3 | Use this section to set up a WPS wireless network by entering the PIN |
| of the ZyXEL Device into the client. |
|
|
Release | The default WPS status is configured. |
Configuration | Click this button to remove all configured wireless and wireless security |
| |
| settings for WPS connections on the ZyXEL Device. |
|
|
Generate | The PIN (Personal Identification Number) of the ZyXEL Device is shown |
New PIN | here. Enter this PIN in the configuration utility of the device you want |
Number | to connect to using WPS. |
| |
| The PIN is not necessary when you use WPS |
| Click the Generate New PIN Number button to have the ZyXEL |
| Device create a new PIN. |
|
|
Apply | Click Apply to save your changes. |
|
|
Cancel | Click Cancel to restore your previously saved settings. |
7.6 The WMM Screen
Use this screen to enable
106 |
| |
| ||
|
|
|