Chapter 11 Policy Forwarding
Table 40 Network Settings > Routing > Policy Forwarding
LABEL | DESCRIPTION |
Source IP | This is the source IP address. |
|
|
Source | This is the source subnet mask address. |
Subnet Mask |
|
|
|
Protocol | This is the transport layer protocol. |
|
|
SourcePort | This is the source port number. |
|
|
Source MAC | This is the source MAC address. |
|
|
WAN | This is the WAN interface through which the traffic is routed. |
|
|
Modify | Click the Edit icon to edit this policy. |
| Click the Delete icon to delete an existing policy. |
|
|
11.2.1 Add/Edit Policy Forwarding
Click Add new Policy Forward Rule the Edit icon next to a policy. Use this information for a policy route.
in the Policy Forwarding screen or click screen to configure the required
Figure 61 Policy Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 41 Policy Forwarding: Add/Edit
LABEL | DESCRIPTION |
Policy Name | Enter a descriptive name of up to 8 printable English keyboard |
| characters, not including spaces. |
|
|
Source IP | Enter the source IP address. |
Address |
|
|
|
Source Subnet | Enter the source subnet mask address. |
Mask |
|
|
|
Protocol | Select the transport layer protocol (TCP or UDP). |
|
|
Source Port | Enter the source port number. |
|
|
Source Mac | Enter the source MAC address. |
|
|
172 |
| |
| ||
|
|
|