Chapter 8 Home Networking
8.2 The LAN Setup Screen
Use this screen to set the Local Area Network IP address and subnet mask of your ZyXEL Device. Click Network Settings > Home Networking to open the LAN Setup screen.
Follow these steps to configure your LAN settings.
1Enter an IP address into the IP Address field. The IP address must be in dotted decimal notation. This will become the IP address of your ZyXEL Device.
2Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed otherwise it is best to leave this alone, the configurator will automatically compute a subnet mask based upon the IP address you entered.
3Click Apply to save your settings.
Figure 44 Network Settings > Home Networking > LAN Setup
130 |
| |
| ||
|
|
|