Chapter 35 Product Specifications

Table 112 Hardware Specifications (continued)

Operation Humidity

20% ~ 85% RH (non-condensing)

 

 

Storage Humidity

20% ~ 90% RH (non-condensing)

 

 

35.2 Firmware Specifications

Table 113 Firmware Specifications

Default IP Address

192.168.1.1

 

 

Default Subnet Mask

255.255.255.0 (24 bits)

 

 

Default User Name

admin

 

 

Default Password

1234

 

 

DHCP Server IP Pool

192.168.1.33 to 192.168.1.132

 

 

Static Routes

16

 

 

Device Management

Use the web configurator to easily configure the rich range of

 

features on the ZyXEL Device.

 

 

Wireless

Allow the IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n

Functionality

wireless clients to connect to the ZyXEL Device wirelessly. Enable

(wireless devices

wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering

to protect your wireless network.

only)

 

Firmware Upgrade

Download new firmware (when available) from the web site and

 

use the web configurator to put it on the ZyXEL Device.

 

Note: Only upload firmware for your specific model!

 

 

Configuration Backup

Make a copy of the ZyXEL Device’s configuration. You can put it

& Restoration

back on the ZyXEL Device later if you decide to revert back to an

 

earlier configuration.

 

 

Port Forwarding

If you have a server (mail or web server for example) on your

 

network, you can use this feature to let people access it from the

 

Internet.

 

 

DHCP (Dynamic Host

Use this feature to have the ZyXEL Device assign IP addresses, an

Configuration

IP default gateway and DNS servers to computers on your

Protocol)

network. Your device can also act as a surrogate DHCP server

 

(DHCP Relay) where it relays IP address assignment from the

 

actual real DHCP server to the clients.

 

 

Dynamic DNS

With Dynamic DNS (Domain Name System) support, you can use

Support

a fixed URL with a dynamic IP address. You must register for this

 

service with a Dynamic DNS service provider.

 

 

IP Multicast

IP multicast is used to send traffic to a specific group of

 

computers. The ZyXEL Device supports versions 2 and 3 of IGMP

 

(Internet Group Management Protocol) used to join multicast

 

groups (see RFC 2236).

 

 

Time and Date

Get the current time and date from an external server when you

 

turn on your ZyXEL Device. You can also set the time manually.

 

These dates and times are then used in logs.

316

 

VSG1432-B101 Series User’s Guide