Chapter 16 Firewall
16.4.1 Add/Edit an ACL Rule
Click Add New ACL Rule or the Edit icon next to an existing ACL rule in the Access Control screen. The following screen displays.
Figure 96 Security Settings > Firewall > Access Control > Add/Edit
The following table describes the labels in this screen.
Table 69 Security Settings > Firewall > Access Control > Add/Edit
LABEL | DESCRIPTION |
General |
|
|
|
Filter Name | Enter a descriptive name of up to 16 alphanumeric characters, not |
| including spaces, underscores, and dashes. |
| You must enter the filter name to add an ACL rule. This field is read- |
| only if you are editing the ACL rule. |
|
|
Select Source | Select the source device to which the ACL rule applies. If you select |
Device | Specific IP Address, enter the source IP address in the field below. |
|
|
Source IP | Enter the source IP address. |
Address |
|
|
|
Select | Select the destination device to which the ACL rule applies. If you |
Destination | select Specific IP Address, enter the destiniation IP address in the |
Device | field below. |
|
|
Destination IP | Enter the destination IP address. |
Address |
|
|
|
222 |
| |
| ||
|
|
|