Chapter 10 Quality of Service (QoS)
Table 34 Class Setup: Add/Edit
LABEL | DESCRIPTION |
TCP ACK | This field is available only when you select IP in the Ether Type field. |
| If you select this option, the matched TCP packets must contain the |
| ACK (Acknowledge) flag. |
|
|
Exclude | Select this option to exclude the packets that match the specified |
| criteria from this classifier. |
|
|
DSCP Mark | This field is available only when you select IP in the Ether Type field. |
| If you select Mark, enter a DSCP value with which the ZyXEL Device |
| replaces the DSCP field in the packets. |
| If you select Unchange, the ZyXEL Device keep the DSCP field in the |
| packets. |
|
|
802.1P Mark | Select a priority level with which the ZyXEL Device replaces the IEEE |
| 802.1p priority field in the packets. |
| If you select Unchange, the ZyXEL Device keep the 802.1p priority |
| field in the packets. |
|
|
VLAN ID | If you select Remark, enter a VLAN ID number with which the ZyXEL |
| Device replaces the VLAN ID of the frames. |
| If you select Remove, the ZyXEL Device deletes the VLAN ID of the |
| frames before forwarding them out. |
| If you select Add, the ZyXEL Device treat all matched traffic untagged |
| and add a second VLAN ID. |
| If you select Unchange, the ZyXEL Device keep the VLAN ID in the |
| packets. |
|
|
To Queue Index | Select a queue that applies to this class. |
| You should have configured a queue in the Queue Setup screen |
| already. |
|
|
Apply | Click Apply to save your changes. |
|
|
Cancel | Click Cancel to exit this screen without saving. |
|
|
162 |
| |
| ||
|
|
|