Chapter 10 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 34 Class Setup: Add/Edit
LABEL | DESCRIPTION |
Active | Select this to enable this classifier. |
|
|
Class Name | Enter a descriptive name of up to 15 printable English keyboard |
| characters, not including spaces. |
|
|
Classification | Select an existing number for where you want to put this classifier to |
Order | move the classifier to the number you selected after clicking Apply. |
| Select Last to put this rule in the back of the classifier list. |
|
|
From Interface | If you want to classify the traffic by an ingress interface, select an |
| interface from the From Interface |
|
|
To Interface | If you want to classify the traffic by an egress interface, select an |
| interface from the To Interface |
|
|
Ether Type | Select a predefined application to configure a class for the matched |
| traffic. |
| If you select IP, you also need to configure source or destination MAC |
| address, IP address, DHCP options, DSCP value or the protocol type. |
| If you select 802.1Q, you can configure an 802.1p priority level. |
|
|
Source |
|
|
|
Address | Select the check box and enter the source IP address in dotted |
| decimal notation. A blank source IP address means any source IP |
| address. |
|
|
Subnet | Enter the source subnet mask. |
Netmask |
|
|
|
Port Range | If you select TCP or UDP in the IP Protocol field, select the check |
| box and enter the port number(s) of the source. |
|
|
MAC | Select the check box and enter the source MAC address of the packet. |
|
|
MAC Mask | Type the mask for the specified MAC address to determine which bits |
| a packet’s MAC address should match. |
| Enter “f” for each bit of the specified source MAC address that the |
| traffic’s MAC address should match. Enter “0” for the bit(s) of the |
| matched traffic’s MAC address, which can be of any hexadecimal |
| character(s). For example, if you set the MAC address to |
| 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a |
| MAC address of 00:13:49:12:34:56 matches this criteria. |
|
|
Exclude | Select this option to exclude the packets that match the specified |
| criteria from this classifier. |
|
|
Destination |
|
|
|
Address | Select the check box and enter the source IP address in dotted |
| decimal notation. A blank source IP address means any source IP |
| address. |
|
|
Subnet | Enter the source subnet mask. |
Netmask |
|
|
|
Port Range | If you select TCP or UDP in the IP Protocol field, select the check |
| box and enter the port number(s) of the source. |
|
|
MAC | Select the check box and enter the source MAC address of the packet. |
|
|
160 |
| |
| ||
|
|
|