Chapter 28 Remote Management

Click Maintenance > Remote Management > TR-069 Client to open the following screen. Use this screen to configure your ZyXEL Device to be managed by an ACS.

Figure 134 Maintenance > Remote Management > TR-069 Client

The following table describes the fields in this screen.

Table 105 Maintenance > Remote Management > TR-069 Client

LABEL

DESCRIPTION

Inform

Select Enable for the ZyXEL Device to send periodic inform via TR-069

 

on the WAN. Otherwise, select Disable.

 

 

Inform Interval

Enter the time interval (in seconds) at which the ZyXEL Device sends

 

information to the auto-configuration server.

 

 

ACS URL

Enter the URL or IP address of the auto-configuration server.

 

 

ACS User Name

Enter the TR-069 user name for authentication with the auto-

 

configuration server.

 

 

ACS Password

Enter the TR-069 password for authentication with the auto-

 

configuration server.

 

 

WAN Interface

Select a WAN interface through which the TR-069 traffic passes.

used by TR-069

If you select Any_WAN, you should also select the pre-configured

client

 

WAN connection(s).

Display SOAP

Select Enable to show the SOAP messages on the console.

messages on

 

serial console

 

 

 

Connection

Select this option to enable authentication when there is a connection

Request

request from the ACS.

Authentication

 

 

 

Connection

Enter the connection request user name.

Request User

When the ACS makes a connection request to the ZyXEL Device, this

Name

 

user name is used to authenticate the ACS.

288

 

VSG1432-B101 Series User’s Guide