Chapter 14 IGMP

14.3.2 IGMP Service Add

Use this screen to add or edit an IGMP multicast service domain. Click Network Settings > IGMP Setting > IGMP Filter > Add a new rule to open the following screen.

Figure 84 Network Settings > IGMP Setting > IGMP Filter > Add a new service

The following table describes the fields in this screen.

Table 59 Network Settings > IGMP Setting > IGMP Filter > Add a new service

LABEL

DESCRIPTION

Service Name

Specify a name to identify the IGMP service domain. You can enter up

 

to 30 characters. You can use letters, numbers, hyphens (-) and

 

underscores (_). Spaces are not allowed.

 

 

Maximum active

Specify to how many of the service domain’s IGMP channels a LAN STB

channels for STB

device is allowed to subscribe.

 

 

Maximum active

Specify to how many of the service domain’s IGMP channels LAN

channels for

devices other than STBs are is allowed to subscribe.

Non-STB

 

 

 

Group List

Use this section to specify the multicast groups and subnet masks for

 

this IGMP service domain.

 

 

Add a group

Click this to add a multicast group and subnet mask to this IGMP

 

service domain.

 

 

Group

This column lists the multicast groups and subnet masks for this IGMP

 

service domain.

 

 

Modify

Click the Delete icon to delete the entry.

 

 

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

 

207

VSG1432-B101 Series User’s Guide