Chapter 4 Tutorials
the ZyXEL Device. Traffic should be forwarded to the port 666 of the Doom server computer which has an IP address of 192.168.1.34.
D=192.168.1.34 | LAN | WAN |
|
|
port 666
A
Thomas may set up the port settings by configuring the port settings for the Doom server computer (see Section 12.2 on page 176 for more information).
1Click Network Settings > NAT > Add new rule and configure the screen with the following values:
Service Name | Doom_Server |
|
|
WAN Interface | Select the WAN interface through which the Doom service is |
| forwarded. This example uses MyDSLConnection. |
|
|
External Port/s | Enter 666 as the Start and End port. |
|
|
Server IP Address | Enter the IP address of the Doom server. This is 192.168.1.34 |
| for this example. |
|
|
Protocol | Select TCP/UDP. This should be the protocol supported by the |
| Doom server. |
|
|
2The screen should look as follows. Click Apply.
| 57 |
|
|