Chapter 21 IPSec

Table 87 Settings > Add/Edit: Auto(IKE)

LABEL

DESCRIPTION

Authentication

Select Pre-Shared Key to use a pre-shared key for authentication. A

Method

pre-shared key identifies a communicating party during a phase 1 IKE

 

negotiation. It is called "pre-shared" because you have to share it with

 

another party before you can communicate with them over a secure

 

connection.

 

Select Certificates (X.509) to use a certificate for authentication.

 

 

Pre-Shared Key

This field is available only when you select Pre-Shared Key in the

 

Authentication Method field.

 

Type up to 15 alphanumeric characters for the pre-shared key. Both

 

ends of the VPN tunnel must use the same pre-shared key. You will

 

receive a “PYLD_MALFORMED” (payload malformed) packet if the same

 

pre-shared key is not used on both ends.

 

 

Local/Remote ID

Select IP to identify this ZyXEL Device by its IP address.

Type

Select DNS to identify this ZyXEL Device by a domain name.

 

 

Select E-mailto identify this ZyXEL Device by an e-mail address.

 

Select ASN1DN (Abstract Syntax Notation one - Distinguished Name)

 

to identify the remote IPSec router by the subject field in a certificate.

 

This is used only with certificate-based authentication.

 

 

Local/Remote ID

When you select IP in the Local/Remote ID Type field, type the IP

Content

address of your computer in the Local/Remote ID Content field.

 

When you select DNS or E-mailin the Local/Remote ID Type field,

 

type a domain name or e-mail address by which to identify this ZyXEL

 

Device in the Local/Remote ID Content field. Use up to 31 ASCII

 

characters including spaces, although trailing spaces are truncated.

 

The domain name or e-mail address is for identification purposes only

 

and can be any string.

 

 

Advanced IKE

Click Show Advanced Settings to display and configure more

Settings

detailed settings of your IKE key management. Otherwise, click Hide

 

Advanced Settings.

 

 

NAT_Traversal

Select Enable if you want to set up a VPN tunnel when there are NAT

 

routers between the ZyXEL Device and remote IPSec router. The

 

remote IPSec router must also enable NAT traversal, and the NAT

 

routers have to forward UDP port 500 packets to the remote IPSec

 

router behind the NAT router. Otherwise, select Disable.

 

 

Phase 1/Phase 2

 

 

 

Mode

Select Main or Aggressive from the drop-down list box. Multiple SAs

 

connecting through a secure gateway must have the same negotiation

 

mode.

 

 

252

 

VSG1432-B101 Series User’s Guide