|
| Chapter 7 Wireless |
| Table 15 More AP: Edit | |
| LABEL | DESCRIPTION |
| Hide SSID | Select this check box to hide the SSID in the outgoing beacon frame |
|
| so a station cannot obtain the SSID through scanning using a site |
|
| survey tool. |
|
|
|
| Client Isolation | Select this to keep the wireless clients in this SSID from |
|
| communicating with each other. |
|
|
|
| MBSSID/LAN | Select this to keep the wireless clients in this SSID from |
| Isolation | communicating with clients in other SSIDs or LAN devices. |
|
|
|
| Enhanced Multicast | Select this check box to allow the ZyXEL Device to convert wireless |
| Forwarding | multicast traffic into wireless unicast traffic. |
|
|
|
| Security Level |
|
|
|
|
| Security Mode | Select Basic (WEP) or More Secure |
|
| add security on this wireless network. The wireless clients which |
|
| want to associate to this network must have same wireless security |
|
| settings as the ZyXEL Device. After you select to use a security, |
|
| additional options appears in this screen. |
|
| Or you can select No Security to allow any client to associate this |
|
| network without any data encryption or authentication. |
|
| See Section 7.2.1 on page 95 for more details about this field. |
|
|
|
| Apply | Click Apply to save your changes. |
|
|
|
| Cancel | Click Cancel to exit this screen without saving. |
|
|
|
7.4 MAC Authentication
This screen allows you to configure the ZyXEL Device to give exclusive access to specific devices (Allow) or exclude specific devices from accessing the ZyXEL Device (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this screen.
| 103 |
|
|