Chapter 7 Wireless
Click Network Settings > Wireless > WDS. The following screen displays.
Figure 33 Network Settings > Wireless > WDS
The following table describes the labels in this screen.
Table 19 Network Settings > Wireless > WDS
LABEL | DESCRIPTION |
Wireless Bridge Setup | |
|
|
AP Mode | Select the operating mode for your ZyXEL Device. |
| • Access Point - The ZyXEL Device functions as a bridge and access |
| point simultaneously. |
| • Wireless Bridge - The ZyXEL Device acts as a wireless network |
| bridge and establishes wireless links with other APs. In this mode, |
| clients cannot connect to the ZyXEL Device wirelessly. |
|
|
Bridge Restrict | This field is available only when you set operating mode to Access |
| Point. |
| Select Enabled to turn on WDS and enter the peer device’s MAC |
| address manually in the table below. Select Disable to turn off WDS. |
|
|
Remote Bridge | You can enter the MAC address of the peer device by clicking the Edit |
MAC Address | icon under Modify. |
|
|
# | This is the index number of the entry. |
|
|
MAC Address | This shows the MAC address of the peer device. |
| You can connect to up to 4 peer devices. |
|
|
Modify | Click the Edit icon and type the MAC address of the peer device in a |
| valid MAC address format (six hexadecimal character pairs, for example |
| 12:34:56:78:9a:bc). |
| Click the Delete icon to remove this entry. |
|
|
108 |
| |
| ||
|
|
|