12

Filtering

This chapter discusses MAC address port filtering.

12.1 Configure a Filtering Rule

Configure the Switch to filter traffic based on the traffic’s source, destination MAC addresses and/or VLAN group (ID).

Click Advanced Application > Filtering in the navigation panel to display the screen as shown next.

Figure 55 Advanced Application > Filtering

The following table describes the related labels in this screen.

Table 25 Advanced Application > FIltering

LABEL

DESCRIPTION

Active

Make sure to select this check box to activate your rule. You may

 

temporarily deactivate a rule without deleting it by deselecting this check

 

box.

 

 

Name

Type a descriptive name (up to 32 printable ASCII characters) for this rule.

 

This is for identification only.

 

 

 

145

XGS-4526/4528F/4728F User’s Guide