Chapter 26 IP Source Guard

26.6.1 ARP Inspection VLAN Status

Use this screen to look at various statistics about ARP packets in each VLAN. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection > VLAN Status.

Figure 124 ARP Inspection VLAN Status

The following table describes the labels in this screen.

Table 84 ARP Inspection VLAN Status

LABEL

DESCRIPTION

Show VLAN range

Use this section to specify the VLANs you want to look at in the

 

section below.

 

 

Enabled VLAN

Select this to look at all the VLANs on which ARP inspection is enabled

 

in the section below.

 

 

Selected VLAN

Select this to look at all the VLANs in a specific range in the section

 

below. Then, enter the lowest VLAN ID (Start VID) and the highest

 

VLAN ID (End VID) you want to look at.

 

 

Apply

Click this to display the specified range of VLANs in the section below.

 

 

VID

This field displays the VLAN ID of each VLAN in the range specified

 

above.

 

 

Received

This field displays the total number of ARP packets received from the

 

VLAN since the Switch last restarted.

 

 

Request

This field displays the total number of ARP Request packets received

 

from the VLAN since the Switch last restarted.

 

 

Reply

This field displays the total number of ARP Reply packets received

 

from the VLAN since the Switch last restarted.

 

 

Forwarded

This field displays the total number of ARP packets the Switch

 

forwarded for the VLAN since the Switch last restarted.

 

 

Dropped

This field displays the total number of ARP packets the Switch

 

discarded for the VLAN since the Switch last restarted.

 

 

 

275

XGS-4526/4528F/4728F User’s Guide