Chapter 41 DHCP
•VLAN - The Switch is configured on a VLAN by VLAN basis. The Switch can be configured as a DHCP server for one VLAN and at the same time the Switch can be configured to relay DHCP requests for clients in another VLAN.
41.2DHCP Status
Click IP Application > DHCP in the navigation panel. The DHCP Status screen displays.
Figure 185 IP Application > DHCP Status
The following table describes the labels in this screen.
Table 130 IP Application > DHCP Status
LABEL | DESCRIPTION |
Server Status | This section displays configuration settings related to the Switch’s DHCP |
| server mode. |
|
|
Index | This is the index number. |
|
|
VID | This field displays the VLAN ID for which the Switch is a DHCP server. |
|
|
Server Status | This field displays the starting DHCP client IP address. |
|
|
IP Pool Size | This field displays the number of IP addresses that can be assigned to |
| clients. |
|
|
Relay Status | This section displays configuration settings related to the Switch’s DHCP |
| relay mode. |
|
|
Relay Mode | This field displays: |
| • None - if the Switch is not configured as a DHCP relay agent. |
| • Global - if the Switch is configured as a DHCP relay agent only. |
| • VLAN - followed by a VLAN ID if it is configured as a relay agent for |
| specific VLAN(s). |
|
|
41.3 DHCP Server Status Detail
Click IP Application > DHCP in the navigation panel and then click an existing index number of a DHCP server configuration to view the screen as shown. Use
362 |
| |
| ||
|
|
|