Chapter 55 Troubleshooting

I forgot the username and/or password.

1The default username is admin and the default password is 1234.

2If this does not work, you have to reset the device to its factory defaults. See Section 4.6 on page 54.

I cannot see or access the Login screen in the web configurator.

1Make sure you are using the correct IP address.

The default in-band IP address is 192.168.1.1.

If you changed the IP address, use the new IP address.

If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I forgot the IP address for the Switch.

2Check the hardware connections, and make sure the LEDs are behaving as expected. See Section 3.3 on page 45.

3Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled.

4Make sure your computer is in the same subnet as the Switch. (If you know that there are routers between your computer and the Switch, skip this step.)

5Reset the device to its factory defaults, and try to access the Switch with the default IP address. See Section 4.6 on page 54.

6If the problem continues, contact the vendor, or try one of the advanced suggestions.

Advanced Suggestions

Try to access the Switch using another service, such as Telnet. If you can access the Switch, check the remote management settings to find out why the Switch does not respond to HTTP.

I can see the Login screen, but I cannot log in to the Switch.

 

459

XGS-4526/4528F/4728F User’s Guide