Chapter 14 Bandwidth Control

Table 36 Advanced Application > Bandwidth Control (continued)

LABEL

DESCRIPTION

Active

Select this check box to activate egress rate limits on this port.

 

 

Egress Rate

Specify the maximum bandwidth allowed in kilobits per second (Kbps) for

 

the out-going traffic flow on a port.

 

 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The

 

Switch loses these changes if it is turned off or loses power, so use the

 

Save link on the top navigation panel to save your changes to the non-

 

volatile memory when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

 

171

XGS-4526/4528F/4728F User’s Guide