Chapter 6 Tutorials
3You clicked the Save link on the Switch to have your settings take effect.
6.3How to Use PPPoE IA on the Switch
You want to configure PPPoE Intermediate Agent on the Switch (A) to pass a subscriber’s information to a PPPoE server (S). There is another switch (B) between switch A and server S. Switch B is connected to switch A. In this way, PPPoE server S can identify subscriber C and may apply different settings to it.
Figure 29 Tutorial: PPPoE Intermediate Agentt Tutorial Overview
| B |
| S | |
|
| |||
A |
|
| Port 12 - Trusted | |
|
| Port 11 - Trusted | ||
|
|
| ||
C |
|
| Port 12 - Trusted | |
|
| |||
Port 5 - Untrusted | ||||
Note: For related information about PPPoE IA, see Section 31.3 on page 302.
The settings in this tutorial are as follows:
Table 7 Settings in this Tutorial
SWITCH | PORT | VLAN | PPPOE IA PORT | |||
CONNECTED | TRUSTED | |||||
|
|
|
| |||
A | Port 5 (to C) | 1 | userC | 00134900000A | Untrusted | |
| Port 12 (to B) | 1 | N/A | N/A | Trusted | |
|
|
|
|
|
| |
B | Port 11 (to A) | 1 | N/A | N/A | Trusted | |
| Port 12 (to S) | 1 | N/A | N/A | Trusted | |
|
|
|
|
|
|
72 |
| |
| ||
|
|
|