Chapter 35 Policy Routing
35.2 Configuring Policy Routing Profile
Click IP Application > Policy Routing in the navigation panel to display the screen as shown. Use this screen to configure a policy routing profile, which can consist of multiple policy routing rules.
Figure 156 IP Application > Policy Routing
The following table describes the labels in this screen.
Table 109 IP Application > Policy Routing
LABEL | DESCRIPTION |
Active | This field allows you to activate/deactivate this policy routing profile and |
| rules in the profile. |
|
|
Profile Name | Enter a descriptive name (up to 32 printable ASCII characters) for |
| identification purposes. Spaces are allowed. |
|
|
Add | Click Add to insert a new policy routing profile to the Switch’s |
| memory. The Switch loses these changes if it is turned off or loses power, |
| so use the Save link on the top navigation panel to save your changes to |
| the |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Clear | Click Clear to set the above fields back to the factory defaults. |
|
|
Index | This field displays the index number of the policy routing profile. Click a |
| number to edit the policy routing profile entry. |
|
|
Active | This field displays Yes when the policy routing profile is activated and No |
| when it is deactivated. |
|
|
Profile Name | This field displays the descriptive name for this profile. This is for |
| identification purposes only. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
324 |
| |
| ||
|
|
|