Chapter 33 Private VLAN

33.2 Configuring Private VLAN

Click Advanced Application > Private VLAN in the navigation panel to display the screen as shown.

Figure 153 Advanced Application > Private VLAN

The following table describes the labels in this screen.

Table 107 Advanced Application > Private VLAN

LABEL

DESCRIPTION

Active

Check this box to enable private VLAN in a VLAN.

 

 

Name

Enter a descriptive name (up to 32 printable ASCII characters) for

 

identification purposes.

 

 

VLAN ID

Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule

 

applies.

 

 

Promiscuous

Enter the number of the port(s) that can communicate with any ports in

Ports

the same VLAN. Other ports belonging to this VLAN will be added to the

 

isolation list and can only send and receive traffic from the port(s) you

 

specify here.

 

 

Add

Click Add to insert the entry in the summary table below and save your

 

changes to the Switch’s run-time memory. The Switch loses these

 

changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when

 

you are done configuring.

 

 

Cancel

Click Cancel to reset the fields to your previous configuration.

 

 

Clear

Click Clear to clear the fields to the factory defaults.

 

 

Index

This is the index number of the rule.

 

 

Active

This shows whether this rule is activated or not.

 

 

Name

This is the descriptive name for this rule.

 

 

VLAN

This is the VLAN to which this rule is applied.

 

 

Promiscuous

This shows the port(s) that can communicate with any ports in the same

Ports

VLAN.

 

 

316

 

XGS-4526/4528F/4728F User’s Guide