|
| Chapter 4 The Web Configurator |
| Table 5 Navigation Panel Links (continued) | |
| LINK | DESCRIPTION |
| VLAN | This link takes you to screens where you can configure |
|
| 802.1Q VLAN (depending on what you configured in the Switch Setup |
|
| menu). You can also configure a protocol based VLAN or a subnet based |
|
| VLAN in these screens. |
|
|
|
| Static MAC | This link takes you to screens where you can configure static MAC |
| Forwarding | addresses for a port. These static MAC addresses do not age out. |
|
|
|
| Static | This link takes you to a screen where you can configure static multicast |
| Multicast | MAC addresses for port(s). These static multicast MAC addresses do not |
| Forwarding | age out. |
|
|
|
| Filtering | This link takes you to a screen to set up filtering rules. |
|
|
|
| Spanning Tree | This link takes you to screens where you can configure the RSTP/MRSTP/ |
| Protocol | MSTP to prevent network loops. |
|
|
|
| Bandwidth | This link takes you to screens where you can cap the maximum |
| Control | bandwidth allowed on a port. |
|
|
|
| Broadcast | This link takes you to a screen to set up broadcast filters. |
| Storm Control |
|
|
|
|
| Mirroring | This link takes you to screens where you can copy traffic from one port |
|
| or ports to another port in order that you can examine the traffic from |
|
| the first port without interference. |
|
|
|
| Link | This link takes you to screen where you can logically aggregate physical |
| Aggregation | links to form one logical, |
|
|
|
| Port | This link takes you to a screen where you can configure IEEE 802.1x port |
| Authentication | authentication as well as MAC authentication for clients communicating |
|
| via the Switch. |
|
|
|
| Port Security | This link takes you to a screen where you can activate MAC address |
|
| learning and set the maximum number of MAC addresses to learn on a |
|
| port. |
|
|
|
| Classifier | This link takes you to a screen where you can configure the Switch to |
|
| group packets based on the specified criteria. |
|
|
|
| Policy Rule | This link takes you to a screen where you can configure the Switch to |
|
| perform special treatment on the grouped packets. |
|
|
|
| Queuing | This link takes you to a screen where you can configure queuing with |
| Method | associated queue weights for each port. |
|
|
|
| VLAN Stacking | This link takes you to screens where you can activate and configure |
|
| VLAN stacking. |
|
|
|
| Multicast | This link takes you to screen where you can configure various multicast |
|
| features, IGMP snooping and create multicast VLANs. |
|
|
|
| AAA | This link takes you to a screen where you can configure authentication, |
|
| authorization and accounting services via external servers. The external |
|
| servers can be either RADIUS (Remote Authentication |
|
| Service) or TACACS+ (Terminal Access Controller |
|
| Plus). |
|
|
|
| IP Source | This link takes you to screens where you can configure filtering of |
| Guard | unauthorized DHCP and ARP packets in your network. |
|
|
|
| Loop Guard | This link takes you to a screen where you can configure protection |
|
| against network loops that occur on the edge of your network. |
|
|
|
| 51 |
|
|