Chapter 16 Mirroring
The following table describes the labels in this screen.
Table 38 Advanced Application > Mirroring
LABEL | DESCRIPTION |
Active | Select this check box to activate port mirroring on the Switch. Clear this check |
| box to disable the feature. |
|
|
Monitor | The monitor port is the port you copy the traffic to in order to examine it in |
Port | more detail without interfering with the traffic flow on the original port(s). |
| Type the port number of the monitor port. |
|
|
Port | This field displays the port number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. |
| Use this row first to set the common settings and then make adjustments on |
| a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Mirrored | Select this option to mirror the traffic on a port. |
|
|
Direction | Specify the direction of the traffic to mirror by selecting from the |
| list box. Choices are Egress (outgoing), Ingress (incoming) and Both. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the Save |
| link on the top navigation panel to save your changes to the |
| memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
176 |
| |
| ||
|
|
|