Chapter 41 DHCP
41.5 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients. Click IP Application > DHCP in the navigation panel, then click the VLAN link In the DHCP Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to configure DHCP settings for on the Switch. See Section 8.6 on page 110 for information on how to do this.
Figure 190 IP Application > DHCP > VLAN
The following table describes the labels in this screen.
Table 134 IP Application > DHCP > VLAN
LABEL | DESCRIPTION |
VID | Enter the ID number of the VLAN to which these DHCP settings apply. |
|
|
DHCP Status | Select whether the Switch should function as a DHCP Server or Relay for |
| the specified VID. If you select Server then fields related to DHCP relay |
| configuration are grayed out and vice versa. |
|
|
| 367 |
|
|