Chapter 32 Error Disable
The following table describes the labels in this screen.
Table 105 Advanced Application > Errdisable > Errdisable Detect
LABEL | DESCRIPTION |
Cause | This field displays the types of control packet that may cause CPU |
| overload. |
|
|
* | Use this row to make the setting the same for all entries. Use this row |
| first and then make adjustments to each entry if necessary. |
| Note: Changes in this row are copied to all the entries as soon as you |
| make them. |
|
|
Active | Select this option to have the Switch detect if the configured rate limit for |
| a specific control packet is exceeded and take the action selected below. |
|
|
Mode | Select the action that the Switch takes when the number of control |
| packets exceed the rate limit on a port, set in the Advanced Application |
| > Errdisable > CPU protection screen. |
| • |
| packets are received. |
| • |
| specified control packets (such as ARP or IGMP packets), or drops all |
| the specified control packets (such as BPDU) on the port. |
| • |
| port has to handle in every one second. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
312 |
| |
| ||
|
|
|