Chapter 37 OSPF
In the OSPF Configuration screen, click Redistribute to display the OSPF Redistribution screen.
Figure 165 IP Application > OSPF Configuration > Redistribute
The following table describes the labels in this screen.
Table 120 IP Application > OSPF Configuration > Redistribute
LABEL | DESCRIPTION |
Redistribute | Route redistribution allows your Switch to import and translate external |
Route | routes learned through RIP routing protocol or configured manually |
| (Static) into the OSPF network transparently. |
|
|
Active | Select this option to activate route redistribution for routes learned through |
| the selected protocol. |
|
|
Type | Select 1 for routing protocols (such as RIP) whose external metrics are |
| directly comparable to the internal OSPF cost. When selecting a path, the |
| internal OSPF cost is added to the AB boundary router to the external |
| metrics. |
| Select 2 for routing protocols whose external metrics are not comparable |
| to the OSPF cost. In this case, the external cost of the AB boundary router |
| is used in path decision to a destination. |
|
|
Metric Value | Enter a route cost (between 0 and 16777215). The default metric value is |
| 15. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
340 |
| |
| ||
|
|
|