Chapter 6 Tutorials
6.5.1 Creating a Guest VLAN
Follow the steps below to configure port 1, 2, 3 and 10 as a member of VLAN 200.
1Access the web configurator through the Switch’s management port.
2Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the settings to the
3Click Advanced Application > VLAN > Static VLAN.
4In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 200 for example) in the Name field and enter 200 in the VLAN Group ID field.
5Select Fixed to configure ports 1, 2, 3 and 10 to be permanent members of this VLAN.
6Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending frames out of these ports.
| 81 |
|
|