Chapter 30 sFlow
30.2 sFlow Port Configuration
Click Advanced Application > sFlow in the navigation panel to display the screen as shown.
Figure 141 Advanced Application > sFlow
The following table describes the labels in this screen.
Table 93 Advanced Application > sFlow
LABEL | DESCRIPTION |
Active | Select this to enable the sFlow agent on the Switch. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Port | This field displays the port number. |
|
|
* | Use this row to make the setting the same for all ports. Use this row first |
| and then make adjustments on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Active | Select this to allow the Switch to monitor traffic on this port and generate |
| and send sFlow datagram to the specified collector. |
296 |
| |
| ||
|
|
|